Atlantic CCCS2 Manual Del Producto página 3

Ocultar thumbs Ver también para CCCS2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance
Replacement diode, gasket
and lens kits are available for
Compact Spotlights. Unplug
the fixture. Loosen the brass lens
ring. Remove lens ring, lens and
gasket. Carefully remove the
diode assembly and replace.
Install new silicone gasket and
lens and reassemble. Ensure
that all components are installed
correctly after servicing and the
lens ring is tightly secured before
submersing the fixture.
LIGHT RING - CCRL5
Installation
The Ring Light is ideal for illuminating bubbling pots, fountains
and uplighting waterfalls. The brass body accommodates 11/ 2 "
standpipes. With the bushing installed, the hole in the center of
the light accommodates 1" standpipes. Simply slide the Ring
Light over the standpipe to illuminate the interior of an
overflowing vase or fountain. Remove the center bushing to
accommodate 11/ 2 " standpipes. The Ring Light's minimal 1/ 2 " profile
makes it ideal for uplighting waterfalls and large trees.
SPOUT LIGHT - CCSL2
Installation
The Spout Light can be installed in the plumbing behind a wall, shining through a Wall Spout
(see Figure 1) or under a core-drilled stone or pot (see Figure 2). The light is designed to be
installed in any tee that has 1" female threads. If the tee is larger than 1", a reducing bushing with
1" female threads will be needed. Install the light into the tee, with the light facing the water
outlet. Apply Teflon tape, paste or RTV silicone to the threads of the light and thread the light
into the fitting. Do not use the cord to twist in the light or allow it to become twisted when
tightening. The spout light cannot transmit light through sweeps or around corners. There must
be a direct path for the light to be transmitted. The use of rigid PVC plumbing (1" diameter or
greater) is highly recommended for the best results.
Figure 1.
1½" Tee
1½" x 1"
Reducing
bushing
Brass
Body
WWCS2:
WWCS4:
Brass Body
Brass Lens Ring
Diode
Gasket
Diode
Gasket
Figure 2.
1" Female
threaded Tee
¾" Kink-Free
tubing
Lens
Slot
Lens
Brass Lens Ring
3

Publicidad

Tabla de contenido
loading

Tabla de contenido