ProBreeze PB-12 Manual De Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
4.
Turn the water tank upside down and unscrew the water tank cap.
5.
Unscrew the filter from the water filter cap and place to one side.
6.
Fill the water tank with two tablespoons of distilled vinegar or bleach in 3L of water
and let it stand for 20 minutes.
7.
Screw the water tank cap (without the filter attached) back tightly into position and
shake well for a few minutes.
Unscrew the water tank cap and screw the filter back into position. Drain and rinse
8.
the water tank with clean water until the distilled vinegar or bleach smell has gone.
Then dry with a clean, soft cloth.
9.
To clean the base, fill the base with water and two teaspoons of distilled vinegar or
bleach and soak for 20 minutes. Drain the base and rinse with clean water. Then dry
with a clean, soft cloth. Do not immerse the base in water.
10.
Use the cleaning brush housed in the bottom of the water tank to gently clean the
ultrasonic oscillator of any white dust (limescale) or debris build up. Note: Use
distilled water to prohibit and/or reduce the build up of white dust (limescale).
11.
Use a soft, dry cloth to clean away any dust, or debris from the exterior surface of the
appliance.
Maintenance
This appliance requires little maintenance. Do not try to fix it by yourself. Refer it to a
qualified service personnel if assistance is required.
Storage
For long-term storage:
1.
Turn off the appliance and unplug the power cord.
2.
Clean the appliance following the Cleaning instructions.
3.
Cover the appliance and all parts with a waterproof covering and store in a safe, dry
place, out of the reach of children.
09 | English

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido