ProBreeze PB-12 Manual De Instrucciones página 8

To do so:
Using the handle remove the water tank from the base of the appliance.
1.
2. Turn the water tank upside down and unscrew the water tank cap. The water tank
cap forms part of the water filter which helps to eliminate contaminants in the water.
3. Fill the water tank with cold or room temperature water (for best results and to
prohibit and/or reduce build up of white dust (limescale) use distilled water). The
maximum capacity of the water tank is 5.6L.
4. Screw the water tank cap tightly back into position to prohibit leaking.
Using two hands replace the water tank on the base of the appliance. Be sure to
5.
align the water tank with the base correctly so that it fits securely in place thereby
preventing leaking.
Once the water tank has been filled, to operate the appliance:
1. Plug the power cord into a suitable power socket.
2. Press the power button to turn the appliance on.
3. After a few seconds mist will start to flow out of the mist outlet.
4. Choose the desired settings.
5. Adjust the 360° mist outlet by hand to direct the mist flow.
Note: When the humidifier is low on water a beep will sound and low water level indicator
light will illuminate on the LED display.
Essential Oils
The aroma diffuser pod allows you to use essential oils to generate a scented mist. To
use:
1. Remove the 360° mist outlet by lining up the two small arrows and lifting up.
2. Open the lid of the aroma diffuser pod and place two to three drops of your chosen
essential oil on the aroma diffuser pad.
3. Close the aroma diffuser pod and replace the 360° mist outlet locking it into position
by ensuring that the two arrows are not aligned.
Operate the appliance as normal but now with a scented mist.
4.
07 | English