Replacing The Filter - ProBreeze PB-12 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
Note: The aroma diffuser pad should only be used for one essential oil. Prior to using a
different essential oil clean the aroma pad by lightly hand washing it in warm water and
then leaving to air dry. Spare aroma diffuser pads are included for your convenience.

Replacing The Filter

The ion-exchange resin filter is designed to remove impurities from the water and ensure
it stays clean for as long as possible. We recommend replacing your filter at least once
every three months or 700 hours of use.
To replace the filter:
1.
Turn off the appliance and unplug it from the power socket.
2.
Using the handle remove the water tank from the base of the appliance.
3.
Turn the water tank upside down and unscrew the water tank cap.
4.
Unscrew the filter from the water filter cap and replace with a new filter.
5.
Screw the water tank cap tightly back into position to prohibit leaking.
Notes:
- Do not throw the water filter cap away when replacing the filter.
- The water reservoir will have filled with water during the operation of the appliance.This
is normal and is required for the appliance to operate as a humidifier.
Replacement filter model number: PB-12F
Cleaning
This appliance requires regular cleaning to reduce the risk of bacteria growth and to
remove any limescale residue. We recommend cleaning the appliance once a week if
being used daily.
To clean the appliance:
1.
Turn off the appliance and unplug it from the power socket.
2.
To clean the pre-filter, remove the pre-filter from the bottom of the appliance and tap
to remove any debris. Replace once clean.
To clean the water tank, using the handle remove the water tank from the base of the
3.
appliance.
English | 08

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido