Tabla De Contenido; General Description; Specifications; Preparing To Paint - Titan ED655 Manual Del Propietário

Table of contents
Safety Precautions ........................................................................... 2
Grounding Instructions ..............................................................................2
General Description ........................................................................ 4
Specifications .................................................................................................4
Preparing to Paint ........................................................................... 4
Attaching the Tip to the Gun....................................................................4
Checking the Outlet Valve (optional) ....................................................4
Attaching the Paint Hose ...........................................................................5
Pressure relief Procedure ............................................................... 5
Priming ............................................................................................. 5
Preparing to Prime .......................................................................................5
Mounting the Paint Hopper......................................................................6
Attaching the Return Tube........................................................................6
Priming the Pump ........................................................................................6
Spraying ........................................................................................... 7
Spraying Technique .....................................................................................7
Practice .............................................................................................................7
cleanup ............................................................................................ 8
Overnight Storage ........................................................................................8
Long-Term Storage ......................................................................................8
Maintenance .................................................................................. 10
Removing and Cleaning the Inlet Valves ...........................................10
Removing and Cleaning the Outlet Valve .........................................10
Cleaning the Hopper Screen ..................................................................10
Troubleshooting ............................................................................ 11
Parts Listings .................................................................................. 32
Main Assembly ............................................................................................32
Diaphragm Pump .......................................................................................34
Pump Head Assembly ...............................................................................36
Hopper Assembly .......................................................................................37
Limited warranty ........................................................................... 40

General Description

This high performance airless sprayer is a precision power tool used
for spraying many types of materials. Read and follow this instruction
manual carefully for proper operating instructions, maintenance and
safety information.
Paint Hopper
Pressure Control
Knob
PRIME/SPRAY
Knob
English

Preparing to Paint

attaching the Tip to the Gun

1. To lock the trigger, push in the trigger lock from left to right,
when looking at the rear of the gun.
POSSIBLE INjEcTION HaZarD. Do not spray without
the tip guard in place. Never trigger the gun unless the
tip is in either the spray or the unclog position. always
engage the gun trigger lock before removing, replacing
or cleaning tip.
2. Thread the tip guard onto the gun. Tighten the nut first by
hand, then tighten more firmly with a wrench.
NOTE: when attaching the tip guard to the gun, align the
tightening
the tip guard
at this angle
Return Tube
Outlet Valve

checking the Outlet Valve (optional)

1. Firmly press the optional pusher valve button on the side of
the pump housing to make sure the outlet ball valve moves
freely.
Power Cord
4
Gun locked Gun unlocked
(gun will not spray) (gun will spray)
tip guard as shown in the figure below, then tighten
with a wrench.
Begin to achieve
the desired
spray angle
when tight.
Pusher Valve Button
(optional)
© Titan Tool. All rights reserved.