Setting The Equalizer (Eq7) - Sony CDX-CA890X Manual De Instrucciones

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music
types (XPLOD, VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM, and OFF (equalizer
OFF)).
You can store a different equalizer setting for
each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a source
(radio, CD, or MD).
2
Press (EQ7) repeatedly until the
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select "OFF."
After 3 seconds, the display returns to normal
play mode.
Adjusting the equalizer curve
You can store and adjust the equalizer settings
for frequency and volume level.
(With the card remote commander)
1
Press (MENU).
2
Press (DISC) (+) or (DISC) (–)
repeatedly until "EQ7 TUNE" appears,
then press (ENTER).
3
Press (SEEK) (+) or (SEEK) (–) to
select the desired equalizer curve,
then press (ENTER).
Each time you press (SEEK) (+) or
(SEEK) (–), the item changes.
4
Select the desired frequency and level.
1 Press (SEEK) (+) or (SEEK) (–) to
select the desired frequency.
Each time you press (SEEK) (+) or
(SEEK) (–), the frequency changes.
62 Hz y 157 Hz y 396 Hz y 1 kHz
y 2.5 kHz y 6.3 kHz y 16 kHz
2 Press (DISC) (+) or (DISC) (–) to
adjust the desired volume level.
The volume level is adjustable by 1 dB
steps from –10 dB to +10 dB.
To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.
5
Press (MENU) twice.
When the effect setting is complete, the
display returns to normal play mode.
19