Setting Up The Wireless System - Sony WAHT-SA2 Manual De Instrucciones

Setting Up the Wireless
System
To use the wireless system, you need to set
up the surround amplifier and your S-AIR
main unit. Before setting, make sure that the
wireless adapters are correctly inserted in
the S-AIR main unit and surround amplifier.
Setting up the S-AIR main
unit
For details on using the S-AIR main unit,
refer to the operating instructions of the
S-AIR main unit.
1
Turn on the S-AIR main unit.
The system turns on.
2
Set up the S-AIR main unit so it is
ready for ID setting.
3
Select the ID for the S-AIR main
unit.
You can select any ID (A, B, or C).
Setting up the surround
amplifier
Front panel
?/1 (Power)
S-AIR/STANDBY
indicator
S-AIR/STANDBY
Rear panel
S-AIR ID switch
A B C
S-AIR ID
1
Set the SURROUND SELECTOR
switch as follows.
5.1 channel system: SURROUND
7.1 channel system
for surround speakers: SURROUND
for surround back speakers:
SURROUND BACK
For more information on multi-channel
surround systems, see "Overview"
(page 3).
2
Set the S-AIR ID switch of the
surround amplifier to match the
ID (A, B, or C) of the S-AIR main
unit.
SURROUND
SELECTOR switch
SURROUND SELECTOR L R
IMPEDANCE USE
PAIRING SURROUND SURROUND BACK 3-16
SPEAKERS
EZW-RT10
7
GB