Adjusting The Volume Of The Subwoofer(S); Changing The Lcd Colour - Sony CDX-CA890X Manual De Instrucciones

(With the card remote commander)
1
During playback or radio reception,
press (MENU).
2
Press (DISC) (+) or (DISC) (–)
repeatedly until "HPF" appears.
3
Press (SEEK) (+) or (SEEK) (–) to
select the cut-off frequency.
Each time you press (SEEK) (+) or (SEEK)
(–), the frequency changes as follows:
OFF (default setting) y 80 Hz y 120 Hz
4
Press (MENU).
After the frequency setting is complete, the
display returns to normal play mode.
Adjusting the volume of the
subwoofer(s)
1
Press (SOURCE) to select a desired
source.
2
Press (SOUND) repeatedly until "SUB"
appears.
3
Press the volume +/– button
repeatedly to adjust the volume of
front/rear speakers.
When adjusting with the card remote
commander, press (SOUND), then press
(SEEK) (+) or (SEEK) (–).
After 3 seconds, the display returns to normal
play mode.
Tip
The volume level is adjustable from –10 dB to +10 dB.
(Below –10 dB, "SUB-ATT" is displayed.)
Adjusting the cut-off frequency for the
subwoofer(s)
To match the characteristics of the connected
subwoofer(s), you can cut out the unwanted high
and middle frequency signals entering the
subwoofer(s). By setting the cut-off frequency
(see the diagram below), the subwoofer(s) will
output only low frequency signals so you can get
a clearer sound image.
Cut-off frequency
80 120
Frequency (Hz)
(With the card remote commander)
1
During playback or radio reception,
press (MENU).
2
Press (DISC) (+) or (DISC) (–)
repeatedly until "LPF" appears.
3
Press (SEEK) (+) or (SEEK) (–) to
select the cut-off frequency.
Each time you press (SEEK) (+) or (SEEK)
(–), the frequency changes as follows:
OFF (default setting) y 120 Hz y 80 Hz
4
Press (MENU).
After the frequency setting is complete, the
display returns to normal play mode.

Changing the LCD colour

You can select one of 7 colour settings for the
LCD.
Press (COLOR) repeatedly to select
the desired LCD colour.
Each time you press (COLOR), the LCD
colour changes.
off
21