■ Operation Details
TIMER
• Use the ON timer to turn on the air
conditioner at the desired time. This
will give you a cooling environment,
e.g. when you return from work or
wake up.
• When the ON timer is set, operation
will start 15 minutes before the
actual set time.
• Use the OFF timer to stop the air
conditioner operation at the desired
time. This can save electricity while
you are going out or sleeping.
• The set timer will repeat daily once
it is set.
• If there is a power failure, you can
press SET button to restore the
previous setting once the power is
resumed.
• If the timer is cancelled, you can
restore the previous setting by
pressing SET button.
Hint
Press CLOCK more than 10 seconds to change the time format from 24 hours to AM/PM format.
●
For your convenience, you could set the air conditioner to operate automatically by using both ON and OFF timer.
●
Troubleshooting
TIMER indicator always on.
●
POWER indicator is blinking 15 minutes before ON
●
timer is activated.
6
HOW TO OPERATE
Timer
Timer
1
1
Select ON or
OFF timer.
CANCEL
CANCEL
Cancel the
selected timer.
● Ensure the clock on the remote control has been set
correctly.
● You could use the ON and OFF timers at the same time.
● To cancel either the ON or OFF timer, press
then press
.
➤
Timer is activated and the setting will repeat itself daily.
➤
The unit is determining the operation mode by sensing the room
temperature. This happens when it has been set to AUTO operation
mode.
2
2
Set the
desired time.
3
3
Confi rm the
setting.
or
,