Operational Elements And Connections - Magnat MC 200 Modo De Empleo

OPERATIONAL ELEMENTS AND CONNECTIONS – FRONT PANEL
16
1
2
3
4
5 6
1 ON/STBY
Switches the device on when it is in the standby
mode. If the LED does not illuminate, actuate the
power switch located on the rear of the device.
Conversely the device can be switched from
power operation to the standby mode.
2 LED STATUS INDICATION
This illuminated display indicates the MC 200's
2 possible states:
• LED is illuminated green: The MC 200 is
switched on. The device is ready for use.
• LED is illuminated red: The MC 200 is in the
standby mode.
3 LINE IN
3.5 mm stereo input jack for an auxiliary audio
device (e.g. MP3 player, etc.).
15 14 13
8
7 9 10 11 12
4 HEADPHONES
6.3 mm stereo output jack for headphones. The
speakers are deactivated when this jack is used.
Set the volume to a low level before connecting
headphones.
5 SOURCE (INPUT SELECTOR SWITCH)
Switches between the different audio sources:
• CD: CD player.
• BT: Connection to a Bluetooth device
• DAB INPUT: Selection of the DAB/DAB+ tuner
• FM INPUT: Selection of the FM tuner
• AUX 1/2: Other audio devices.
• DIGITAL OPT, DIGITAL COAX:
Connecting to digital audio sources.
• LINE IN: Front input for portable devices
• NETWORK: Network/streaming input, control
via the app.
• NET RADIO: Internet radio input, control via
the remote control.
6 TUNING -/+
FM mode:
• Brief press: Changes the receiving frequency
in 50kHz increments (FM) (manual station
search).
• Press and hold: Searches for the next station
(automatic station search).
DAB mode:
• Selects the next or previous station in the DAB
band.
7 STATION -/+
FM mode:
• Brief press: Selects the next station from the
preset stations.
• Press and hold: Selects the previous station
from the preset stations.
8 CD COMPARTMENT
Insert the CD into the compartment with the label
facing upwards.
9 STOP
Stops a CD that is playing.
10 PLAY/PAUSE
Starts or pauses the playback from a CD.
11 EJECT
Opens or closes the CD compartment.
16
12 SEARCH/SKIP/MENU
CD mode:
Search/Skip backwards
• Rotated briefly to the left: Playback starts at the
beginning of the current track.
• Rotated briefly to the left x2: Playback starts at
the beginning of the previous track.
• Rotated to the left and held: High-speed rewind.
Remains active for as long as the knob is held.
SEARCH/SKIP FORWARDS
• Rotated briefly to the right: Playback starts at
the beginning of the next track
• Rotated to the right and held: Fast forward.
Remains active for as long as the knob is held.
MENU settings
Press the knob to access the menu for setting
the sound and adjusting further parameters. Turn
the knob to navigate through the menu. Press the
knob again to confirm the set parameters.
For further information see also the following
chapters:
• THE MC 200'S MENU
• NETWORK SETUP
13 VOLUME
For adjusting the overall volume of the music.
14 DIM
This button can be used to adjust the brightness
of the display (3 levels).