Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
RADIO CONTROLLED
CLOCK WITH TEMPERATURE
USER' INSTRUCTIONS
Thank you for your purchase of this delicate Radio
Controlled clock. The utmost care has gone into the
design and manufacture of your clock. Please read the
instructions carefully and keep the manual well for
future reference.
GETTING STARTED
1. Remove the battery door.
2. Install two new AA size batteries as per the polarity
information marked on the battery compartment.
3. Replace the battery door.
4. Once the battery is installed, the normal segments
of the LCD will be shown before entering the radio
controlled time reception mode.
5. When insert battery, the RC clock will display at 2:00
am and start synchronize the radio controlled time
signal in 8 seconds.
Note
If no display appears on the LCD after inserting
the battery, press the "RESET" key by using a metal
wire. In some cases, you may not receive the signal
immediately. Due to the atmospheric disturbance, the
best reception often occurs during nighttime.
FUNCTION KEYS
CLOCK key:
- In normal time mode,press and hold it for 2
seconds to enter normal time setting.
- In setting mode, press it to step the setting items,
or press and hold it for 2 seconds to return to
normal time mode and save the values.
ALARM key:
- In normal time mode, press it to display alarm time
for 5 seconds. Or press and hold it for 2 seconds to
enter alarm time setting.
- In setting mode, press it to step the setting items.
- After setting, press it again to save the setting
values.
ALARM ON / OFF switch:
- Slide the switch to turn on/off the alarm.
DOWN key:
- In setting mode, press it to decrease the setting
value. Press and hold it to speed up the setting.
UP key:
- In setting mode, press it to increase the setting
value. Press and hold it to speed up the setting.
SNOOZE/LIGHT
- Press it once to turn on the backlight for 5 seconds.
- When the unit is sounding,press it to stop the
current alarm and enter the snooze mode.
DCD-200
NIGHT LIGHT FUNCTION ON/OFF switch:
- Slide it to ON position to turn on the night
light function, that the backlight will turn on
automatically when the light-sensor can not sense
light in dark environment.
- Slide it to OFF position to turn off the night light
function.
RCC key:
- Press it to switch between Celsius and Fahrenheit.
- Press and hold it for 3 seconds to receive the RC
signal for reception testing.
RESET key:
- Press it to set all values to default values. In case of
mal-function, the unit may be required to reset.
PRODUCT DESCRIPTION
1. LCD display
2. CLOCK key
3. ALARM key
4. ALARM ON/OFF switch
5. DOWN key
6. UP key
7. SNOOZE/LIGHT key
8. RESET key
9. RCC key
10. NIGHT LIGHT FUNCTION ON/OFF switch
11. Battery compartment
7
1
2 3
4
5
DISPLAY SYMBOLS
Normal time mode
1. Time
2. AM/PM
3. Month
4. Date
5. Day of the week
6. Temperature
7. Signal strength indication
8. Daylight saving time
Alarm time mode
1. Alarm time
2. AM/PM
3. Alarm icon
DAYLIGHT SAVING TIME (DST)
The clock has been programmed to automatically
switch when the daylight saving time is in eff ect. Your
clock will show "DST" during the summer.
SIGNAL STRENGTH INDICATOR
The signal indicator displays signal strength in 4
levels.
6
8 9
10
2
1
3
4
5
2
1
11
8
7
6
3
Publicidad
Tabla de contenido
