Measuring Blood Pressure; Attaching The Cuff - Beurer BC 57 Manual De Instrucciones

The hours flash on the display.
• Select the desired hour using
the memory button M and con-
firm with the Start/Stop button
.
The minutes flash on the display.
• Select the desired minute using
the memory button M and con-
firm with the Start/Stop button
.
The Bluetooth symbol flashes on the display.
®
• Use the memory button M to select
whether automatic Bluetooth
is activated (Bluetooth
or deactivated (Bluetooth
shown) and confirm with the Start/Stop
button .
Bluetooth transfers will reduce the
®
battery life.
AM
AM
data transfer
®
symbol flashes)
®
symbol is not
®

7. Measuring Blood Pressure

The blood pressure monitor needs to be at
room temperature when measuring. Measure-
ments can be performed on the left or right
arm.

Attaching the Cuff:

1. With your palm up, place the cuff around
your left wrist about 0.4 in (1 cm) below the
bottom of your hand.
2. Secure the cuff with the hook and loop strip
so that it fits snugly but does not affect
blood circulation.
1
19
2 3