Correct Posture - Beurer BC 57 Manual De Instrucciones

Correct posture

• Rest for at least five
minutes before each
measurement.
• Perform the mea-
surement either sit-
ting or lying down.
Always make sure
that the cuff is level
with your heart.
• To perform a measurement, sit comfortably
with your arms and back supported. Do not
cross your legs and place your feet flat on
the floor.
• Keep still during the measurement and do
not talk.
• Relax your arm and the palm of your hand
• • • • • • • • • • • • •
Performing the blood pressure measurement
As described above, attach the cuff and adopt
the posture in which you want to perform the
measurement.
• Press the Start/Stop button
to start the blood pressure
monitor. All displays will
illuminate briefly.
The blood pressure monitor will
begin the measurement auto-
matically after 5 seconds.
The measurement is taken
during the inflation phase.
You can cancel the measurement at any time
by pressing the Start/Stop button
As soon as a pulse is found, the pulse symbol
is displayed.
• The systolic pressure, diastolic pressure and
pulse rate measurements are displayed.
20
.