Zodiac Security 559590435 Manual De Usuario página 97

the left border button to determine the position of the left border. Through the direction buttons
to select the camera to the right edge of line scan, position and click on the settings button on
the right the right edge, complete the set of line sweep of the road.
Preset point
Action: through the direction button to turn the camera to the desired position, preset point
enter the preset values in the input box, click on the Add button to save.
Cruise group
Operations: cruise line value entered in the input box. Preset point enter preset point value in
the input box, click on the Add button, which is cruising at that point were added to the group a
preset point. Multiple operations increased more than a preset point. Or click on the delete
button, you can delete the presets the cruise route between points. Also multiple operations to
remove more than one already exists in the cruise set preset point between points.
Scan
Action: record the process of patrol tracks x, click on the Start button, and then return to the
PTZ control menus, gathered after a series of operations, such as orientation, Aperture, or go
back to the patrol track settings menu, click on the stop button. Complete the Setup on a
patrol track route.
Aid
Select a secondary item, click Start or Stop button.
Wipers
PTZ protocol with lights wipers premise can be turned on lights wipers on and off control.
5.1.6 System Configuration
Click on the [system configuration] can access DVR configure local management of the
configuration menu, as shown in the figure. Detailed configuration methods, refer to 4 local
operations guide.