Getting Started - Using Kits - Alesis ControlPad Manual De Referencia

GETTING STARTED – USING KITS
The ControlPad automatically goes into Kit selection mode each time it is
turned on. Notice that the LED next to Kit is lit. If you are in a different
mode, you can always get to the Kit selection
mode by pressing the function button until the
LED next to Kit is illuminated.
While in Kit selection mode, you can use the
and buttons to select different kits. The
ControlPad will automatically load the kits as
you step through the values. There are 21
available kits that you can load, modify and
store.
8
Kit
?
A Kit, also known as a
Preset, is a collection of
parameters which describe
different configurations of
the ControlPad. These
parameters include the
MIDI Note Numbers
assigned to individual pads
or external triggers, as
well as the MIDI Channels
on which the pads or
external triggers are
sending information. This
allows you to store and
access different setups of
the pads.