Adjusting Kit Performance; Additional Information - Alesis ControlPad Manual De Referencia

ADJUSTING KIT PERFORMANCE

Each kit piece has a few general controls. You can use these
controls to solo, mute, and adjust tuning and level for each
particular kit piece.
1. SOLO – Pressing this button will solo
only that kit piece and no other piece will
be heard.
2. MUTE – Pressing this button will mute
the particular kit piece so it will not play when it is triggered.
3. TRIM – This knob functions as a volume gain knob. Use
this knob to adjust the level of the kit piece.
4. TUNE – Turn this knob to tune the kit piece up and down.
5. DYNAMICS – Using this control, you can make a kit-piece play
'softer' or 'harder'. BFD Lite's sounds are recorded with many
velocity layers: adjusting the Dynamics control can achieve a variety
of realistic levels of striking force: from soft and jazzy to hard and
loud.
!

Additional Information

Please refer to the BFD Lite user manual which can be found under
Start | All Programs |FXpansion | BFD Lite | BFD Lite Manual for
additional information about the BFD Lite Software. The concepts
discussed in this chapter are quick tips on how to begin using the
ControlPad with the BFD software. However, the software also offers
much more in-depth control for realistic and customizable performance.
Please take the time to familiarize yourself with the software by reading
the BFD Lite Manual.
21