Refrigerator Use; Using The Controls - KitchenAid KSRP22FTWH Manual De Uso

3. Thread the provided nut onto the water valve as shown.
NOTE: Tighten the nut by hand. Then tighten it with a wrench
two more turns. Do not overtighten.
A. Bulb
B. Nut (provided)
4. Turn shutoff valve ON.
5. Check for leaks. Tighten any nuts or connections (including
connections at the valve) that leak.
For your convenience, your refrigerator controls are preset at the
factory. When you first install your refrigerator, make sure that the
controls are still preset. The Refrigerator Control and the Freezer
Control should both be set to the "mid-settings."
Your model may have Slide Controls, Electronic Controls or Digital
Controls.
IMPORTANT (All Controls):
The Refrigerator Control adjusts the refrigerator compartment
temperature. The Freezer Control adjusts the freezer
compartment temperature.
Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your
food may spoil.
NOTE: Adjusting the Refrigerator and Freezer Controls to a
higher (colder) than recommended setting will not cool the
compartments any faster.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
A
B
1. Plug into a grounded 3 prong outlet.
2. Flush the water system. See "Water and Ice Dispensers."
NOTE: It may take up to 24 hours for your ice maker to begin
producing ice.

REFRIGERATOR USE

Using the Controls

Style 1
cold
Style 2
IMPORTANT:
Adjusting Slide Controls
Settings to the left of the mid-setting make the temperature less
cold. Settings to the right of the mid-setting make the temperature
colder.
Complete the Installation
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Slide Controls (on some models)
Freezer
1 2 3 4 colder
Freezer
Off 1 2 3 4 Colder
For Style 1, your product will not cool when the Refrigerator
control is set to OFF. For Style 2, your product will not cool
when the Freezer Control is set to OFF.
The Automatic Exterior Moisture control continuously guards
against moisture buildup on the outside of your refrigerator
cabinet. This control does not have to be set or adjusted.
Slide the FREEZER or REFRIGERATOR control one setting to
the right or left depending on the needed temperature change.
Refrigerator
off 1 2 3 4
colder
Refrigerator
Cold 1 2 3 4 Colder
5