Assembly Of Shower Panel (2-Part Function Block) - Franke A3000 Instrucciones De Montaje Y Uso

Ocultar thumbs Ver también para A3000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
9.

Assembly of Shower Panel (2-part Function Block)

9.1
Remove the stainless steel housing or open the glass front.
For further details please consult the Installation and Operating Instructions for the
fitting.
9.2
Use a hollow hexagon wrench to close the water volume regulators.
a: closed
b: open
9.3
Trigger the valve.
Spare parts
9.4
Disconnect the line connection between the solenoid valve cartridge and the
electronic module.
9.5
Remove the screws (c).
9.6
Remove the solenoid-valve cartridge (d).
9.7
Use a flat nose pliers to pull the existing filter (e) out.
9.8
Continue with
Retrofitting thermal disinfection
9.9
Remove the screws (f).
9.10 Unscrew the plug (g).
Use an M8 screw to pull out the plug via the centre thread.
9.11 Insert the new filter.
Important!
Ensure correct installation position. The rib of the filter must not lie on the flow-
through hole.
9.12 Insert the solenoid-valve cartridge.
9.13 Tighten the screws.
9.14 Connect the line connection between the solenoid-valve cartridge and the electronic
module (k).
l: Solenoid-valve cartridge mixed water
m: Solenoid-valve cartridge bypass, thermal disinfection
Insert an adapter (n) if necessary.
9.15 Mount the stainless steel housing or close the glass front.
stap
9.11.
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Zaqua015Eshow001420001004312000104443

Tabla de contenido