Features - Ryobi YN500A Manual Del Operador

PRODUCT SPECIFICATIONS
Motor .................................................................. 12 Volt DC
High Pressure Hose Length ....................................... 24 in.
KNOW YOUR INFLATOR
See Figure 1, page 12.
The safe use of this product requires an understanding of
the information on the inflator and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
12 V ADAPTOR
This connector is used to charge the battery pack using
appropriate 12 V DC power sources.
NOTE: The adaptor will not power the tool.
12 V RECEPTACLE
The inflator can be used to power other 12 V DC products.
NOTE: Plugging the 12 V adaptor into the 12 V receptacle
will discharge the inflator's power supply.
CAUTION:
Do not use the 12 V receptacle to power items rated less
than 12 V or items without proper protection. Failure to
heed this warning could result in damage to the inflator
or the item being powered.
AC ADAPTOR/CHARGER
The inflator can be plugged into an AC power source.
NOTE: The AC adaptor/charger provides charging function
only, it will not power the tool.
ACCESSORY COMPARTMENT
The inflator features a storage space for inflator accessories
and the AC adaptor/charger.

FEATURES

Gauge ...............................Analog (PSI, KG/CM
Maximum Pressure ..... 150 PSI, 10.34 BAR, 10.55 KG/CM
NOZZLES
Nozzles provided with the inflator can be used in a variety
of applications.
BUILT-IN HOSE WRAP
The inflator has a built-in hose wrap that allows easy storage
of the high pressure hose.
CARRY HANDLE
The inflator has a carry handle for easy transport.
CORD WRAP
The cord retainer keeps the 12 V adaptor cord neatly out of
the way for storage.
NOTE: To reduce cord slack, press excess cord into grooves
in the cord retainer.
DIAGNOSTIC FEEDBACK
When the diagnostic button is pressed, the LEDs provide
feedback to indicate the charge status of the inflator.
HIGH PRESSURE AIR HOSE
The high pressure hose can easily inflate high pressure items
like motorcycle, car, and bicycle tires.
INFLATOR ON/OFF SWITCH
Depress the inflator on/off switch on to the on (I) position
to power the inflator on. To turn the inflator off (O), depress
the switch to the off position.
PRESSURE GAUGE
The pressure gauge measures air pressure from 0 to
150 psi.
WORKLIGHT ON/OFF SWITCH
Depress worklight on/off switch to turn light on and off.
7 — English
, and BAR)
2
2