Steren CCTV-060 Manual De Instrucciones página 23

TROUBLESHOOTING
Not audio or image
Image with noise
The door don't open
SPECIFICATIONS
Monitor:
Input: 13.5 V - - - 1.2 A
Output (to camera)): 12 V - - -
Resolution: 320 x 240
Video output: 1 Vpp
Consumption: 10W/h
Stand-by power consumption: 0.5 W/h
Camera:
Input: 12 V - - -
Consumption: 2 W
Angle of vision: 52°
Minimum lux: 0.1 lux @ 30cm
Power converter:
Input: 100-120V~ 60Hz 400mA
Output: 13.5 V - - - 1.2 A
• Be sure that the device is connected to
energy supply.
• Review the connections in accord with the
diagram.
• Verify the wires status; may be damaged or
cutted.
• Verify the connections, some cable may be
disconnected.
• Adjust the controls of broghtness and con-
trast.
• Review the connection of the electric lock.
• Check that the electric lock is compatible with
this device.
23