Using The Device For The Fi Rst Time; Setting Up The Device; Connecting The Headphones; Connecting The Power Supply - Medion MD 80018 Manual Del Usuario

USA
Using the device for the fi rst time
Using the device for the fi rst time

Setting up the device

Place the device on a sturdy, level surface.

Connecting the headphones

− You can connect headphones with a 3.5 mm jack plug to the socket on the right side of the device. The speakers
switch off automatically whenever the headphones are connected.
CAUTION!
Loud volumes when using headphones or earphones generate excessive acoustic
pressure that can cause hearing loss.
− Before putting on headphones, set the volume to a minimum.

Connecting the power supply

− Once you have made all the connections, connect the plug to an easily accessible power socket (100-240 V ~
50/60 Hz.).

Switching the device on/off

− Switch the device on by turning the volume controller in a clockwise direction. The operating display will light up.
When the device has been switched off, it will continue to consume electricity. In order to switch it off completely,
please disconnect the plug.
If you do not need to use the device for a relatively long time, please take it out of operation. Disconnect the plug for
this purpose.
Connecting an external amplifi er
You can optionally connect an external amplifi er that takes over the sound output from the device.
− For the sound transmission, also connect an audio cinch cable to the
of the plugs and sockets match.

Setting the volume

− Turn the volume controller on the device lightly in a clockwise or anti-clockwise direction to increase or decrease
the volume of the device.
12
www.medionusa.com
L/R OUT
connection. Ensure that the colors
AFTER SALES SUPPORT
866-633-4660
USA