Hoshizaki FM-600ALKE-CO2-SB Manual De Instrucciones página 7

Maquina de cubitos modular
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
ENGLISH
When the total operating time reaches 20,000 hours,
the display flashes "PC". Then, after 500 hours, the
unit shuts down to ensure safety. Contact your local
Hoshizaki service agent for replacement as soon as
the display starts flashing.
Once the unit shuts down after 500 hours, the
operation can be resumed by turning off the operation
switch and turning it back on. But the unit shuts down
again after 500 hours. To resume the operation,
contact your local Hoshizaki service agent for the
required replacement.
Replacement of the housing (lower bearing) may
be required depending on water quality and wear
condition.
3. SERVICE CALL
WARNING
Do not damage the refrigerant circuit.
[1] Error Code Indication
If the error code "E" is indicated on the display, before
calling for service, check the following.
Code
E0
Possibility of water leaks. Turn OFF operation switch,
and turn it ON again. If error code appears again, call
for service.
E1
Low ice production. Turn OFF operation switch, and
turn it ON again. If error code appears again, call for
service.
E2
Water supply circuit failure. Turn OFF operation switch,
and turn it ON again. If error code appears again, call
for service.
E3
Gear motor failure. Turn OFF operation switch, and
turn it ON again after 10 minutes. If error code appears
again, call for service.
E5
Electric circuit failure. Turn OFF operation switch, and
turn it ON again. If error code appears again, call for
service.
E8
Compressor could be overheated. Check that icemaker
is properly installed according to installation manual.
Turn OFF operation switch, and turn it ON again after
10 minutes. If error code appears again, call for service.
EA
Electric circuit failure. Turn OFF operation switch, and
turn it ON again. If error code appears again, call for
service.
Eb
Electric circuit failure. Turn OFF operation switch, and
turn it ON again. If error code appears again, call for
service.
EC
Electric circuit failure. Turn OFF operation switch, and
turn it ON again. If error code appears again, call for
service.
EE
Gear motor failure. Turn OFF operation switch, and turn
it ON again. If error code appears again, call for service.
EF
Supply voltage is too low. Check that voltage is in
required range and icemaker is not sharing a single
receptacle with other appliances. Turn OFF operation
switch, and turn it ON again. If error code appears
again, call for service.
Remedy
EH
Electric circuit failure. Turn OFF operation switch, and
turn it ON again. If error code appears again, call for
service.
EL
Bin control switch has failed. Turn OFF operation
switch, and turn it ON again. If error code appears
again, call for service.
En
Electric circuit failure. Turn OFF operation switch, and
turn it ON again. If error code appears again, call for
service.
EU
Controller board failure. Turn OFF operation switch, and
turn it ON again. If error code appears again, call for
service.
[2] No Error Code Indication
If the icemaker does not work properly or does not
work at all and no error code is indicated on the
display, before calling for service, check that:
* The power is supplied to the unit.
* The water is turned on.
For further assistance or advice, contact your local
Hoshizaki service agent.
4. WARRANTY
Hoshizaki warrants to the original owner/user that all
Hoshizaki branded products shall be free of defects
in material and/or workmanship for the duration of the
"warranty period". The warranty shall be effective for
two years from the date of installation.
Hoshizaki's liability under the terms of the warranty
are limited and shall exclude routine servicing,
cleaning, essential maintenance and/or repairs
occasioned by misuse and installations not in
accordance with Hoshizaki guidelines.
Warranty repairs should be completed by an
approved Hoshizaki dealer or service agency using
genuine Hoshizaki components.
To obtain full details of your warranty and approved
service agency, please contact your dealer/supplier,
or the nearest Hoshizaki Service office:
Europe, Middle East, Africa
Hoshizaki UK - UK, Ireland
TEL: +44 845 456 0585
FAX: +44 132 283 8331
uksales@hoshizaki.co.uk
Hoshizaki Deutschland - Germany, Switzerland,
Austria
TEL: +49 2154 92810
FAX: +49 2154 928128
info@hoshizaki.de
6

Publicidad

Tabla de contenido
loading

Tabla de contenido