Operating Elements And Connections - Leuchtkraft LED-162RGBW Manual De Instrucciones

DMX LED Light Effect Unit
These instructions are intended for users with
basic knowledge in DMX control . Please read
these instructions carefully prior to operating the
unit and keep them for later reference .
The unit and the menu structure can be
found on the fold-out page 3 .
Contents
1 Operating Elements and Connections . 10
2 Safety Notes . . . . . . . . . . . . . 11
3 Applications . . . . . . . . . . . . . 11
4 Setting the Unit into Operation . . . . 11
4.1 Installation . . . . . . . . . . . . . . . 11
4.2 Power supply . . . . . . . . . . . . . . 11
5 Operation . . . . . . . . . . . . . . . 12
5.1 Independent operation . . . . . . . . . . 12
5.1.1 Operation with the remote control . . . . 12
5.2 Master/slave mode . . . . . . . . . . . 13
5.3 Operation with a DMX controller . . . . . 13
5.3.1 Connection . . . . . . . . . . . . . . 13
5.3.2 Setting the start address and
the number of DMX channels . . . . . . 14
5.3.3 DMX functions . . . . . . . . . . . . . 14
5.4 Display switch-off / reset /
test program / firmware version . . . . . . 15
6 Cleaning the Unit . . . . . . . . . . . 15
7 Specifications . . . . . . . . . . . . . 15
10
1 Operating Elements and
Connections
1 Locking screw (2 ×) for the mounting bracket
2 Eyebolt for fastening a safety rope
3 Mains jack for connection to a socket (230 V/
50 Hz) via the mains cable provided
4 Connection POWER LINK OUTPUT to provide
power to another unit
5 Support for the mains fuse
Always replace a blown fuse by one of the
same type .
6 Mounting bracket
7 Microphone for music-controlled light ef-
fects
8 Control SENS to adjust the microphone sen-
sitivity for a music-controlled light show
9 LEDs for the operating mode
DMX = DMX mode
AUTO = automatic light show
10 Display
11 LEDs for the operating mode
SLAVE = slave mode: control by a con-
nected master unit
SOUND = music-controlled light show
12 Control buttons
MENU = to select the operating mode or
to return to the previous func-
tion
UP/DOWN = to change a setting
ENTER = to call up a submenu, to save a
setting
13 DMX output (XLR) for connection to the
DMX input of another DMX-controlled unit
14 DMX input (XLR) for connection to a DMX
light controller or for connection to a differ-
ent DMX-controlled unit