Replaying Music Titles; Title Selection - IMG STAGELINE CD-112/BT Manual De Instrucciones

4 Deactivating the Automatic
Start Function
The CD player is provided with an automatic
start function: After switching on the unit and
reading in a sound carrier (CD, USB flash drive
or memory card) the replay of the first title will
start automatically. If you do not wish the unit to
start automatically [replay will not start before the
button PLAY/ PAUSE (10) is pressed], deacti-
vate the automatic start function.
WARNING To make this modification, the unit
must be opened by skilled person-
nel only. Inexpert handling may
result in electric shock!
Always disconnect the mains plug from the
socket before opening the unit!
On the PCB with the power supply unit and the
audio output jacks there is a jumper (see arrow
in fig. 5). The automatic start function is activated
when the jumper is in the position AUTO PLAY.
To deactivate the function, re arrange the jumper
to the position MANUAL PLAY.
5 Setting Up and
Connecting the Player
The player is designed for installation into a rack
(482 mm /19"); however, it can also be placed as
desired as a desktop unit. For rack installation,
1 rack space (RS = 44.45 mm) is required.
Prior to making or changing any connec-
tions, switch off the CD-112 / BT and the units to
be connected.
1) Three line level outputs are available to route
the audio signals to the subsequent unit (e. g.
mixer or amplifier):
PRIORITY OUT (21)
At this output, either the signal of the Blue-
tooth receiver or, if no signal is received or
if the replay has been set to pause, the
signal of the CD / MP3 player is present.
BLUETOOTH OUT (22)
for the signal of the Bluetooth receiver
CD PLAYER OUT (23)
for the signal of the CD / MP3 player
2) Connect the mains cable provided to the
mains jack (24) first and then to a mains
socket (230 V~ / 50 Hz).
6 Operation
Switch on the player with the POWER switch (1).
Welcome
The display (4) will show
First the player will read the CD. If no CD has
been inserted, the player will read the USB flash
drive. If no USB flash drive has been connected,
the player will read the memory card. If no mem-
ory card has been inserted, the display will show
NO DISC
.
6.1 Remote control
1) To insert the batteries (2 × 1,5 V, size AAA),
remove the battery compartment cover on
the rear side of the remote control. Insert the
batteries as indicated in the battery compart-
ment. Close the compartment with the cover.
If the remote control is not in use for a
longer period of time, remove the batteries to
prevent any damage due to battery leakage.
2) When you press a button on the remote con-
trol, always direct the remote control towards
the sensor IR (7). There must be no obstacles
between the remote control and the sensor.
3) If the range of the remote control decreases,
the batteries are exhausted and must be
replaced.
Used batteries must not be placed in
the household waste; always take
them to a special waste disposal, e. g.
collection container at your retailer.

6.2 Replaying music titles

1) Insert a CD with the lettering facing up into
the slot (5) until it is pulled in automatically
and / or
connect a USB flash drive to the USB port (6)
or connect a hard disk (with individual power
supply, if required) to the USB port
and / or
insert a memory card into the slot SD / MMC
CARD (2), the notched corner of the card fac-
ing up. To remove the card, slightly push it in
to eject the card from the slot.
2) Select the sound carrier (CD, USB flash
drive, memory card) with the button FUNC
(19), if necessary.
3) After loading the sound carrier, the first title
will start automatically. However, if the auto-
matic start function has been deactivated
(chapter 4), press the button PLAY/ PAUSE
(10) to start the first title. To select other titles
see chapter 6.3.
4) While replaying, the upper line of the display
will show the replay symbol
The lower line will show the number (TR ...)
of the current title and the time already played
of the title (min. : sec.). On the far right,
is shown for titles in MP3 format or
standard audio CDs.
5) For MP3 files, the following additional infor-
mation will scroll in the upper line:
File – ...
Title – ...
Artist – ...
Album – ...
Note: The file name will only be displayed after
starting the replay. If an information is not available,
the display will show
6) When you press the button DISPLAY (29) on
the remote control, various information for
MP3 files will be displayed in the lower line of
the display:
basic setting
The lower line will show the title number
and the time already played of the title.
first actuation of button
.
The folder name will be displayed.
second actuation of button
The file name will be displayed.
third actuation of button
The number of folders and the number of
titles will be displayed.
fourth actuation of button
return to basic setting
7) Press the button PLAY/PAUSE to switch be -
tween replay and pause. In the pause mode,
the pause symbol
time indication will flash.
8) To stop the replay, press the button STOP (9).
The second line of the display will show:
for standard audio CDs
– the number of titles (TR ...)
– the total playing time (min.: sec.)
for audio carriers with MP3 files:
– the number of folders
– the number of titles
9) To eject the CD, press the button EJECT

6.3 Title selection

6.3.1 Direct selection of the title number
For direct selection of a title, enter its number
with the numerical keys (3). To start the title,
press the button PLAY/ PAUSE (10). Examples:
Title number
135
Note: The player will arrange MP3 titles as follows:
1. all titles without folder in the ROOT directory
2. all titles in folders in the ROOT directory
3. all titles in subfolders, etc.
The titles and folders will not be arranged in alphabeti-
cal order, but can be easily found with the search func-
tion (
6.3.2 Skipping titles
To skip one title or several titles in forward or
reverse direction, briefly press the button CUE or
REV (8) [repeatedly].
Button CUE: to skip to the next title
Button REV: to return to the beginning of the title
on the right.
currently playing. Each time the button REV is
pressed again, the unit will go back one title at a
MP3
time.
ESP
for
Note: Only press the buttons REV and CUE briefly,
longer actuation will result in fast forward or reverse.
6.3.3 Alphabetical search for MP3 titles
1) Press the button FIND (27). A magnifying
2) Press the button CUE [forward direction] or
NONE
instead of a name.
3) If there are several file names beginning with
4) When searching, the display will always show
will be inserted and the
6.3.4 Selection of folders and
With MP3 files in several folders (file directories),
press the buttons FOLDER (16) during the
replay to go to the first title of the next folder (but-
ton
(button
(9) first and then press the button FOLDER
or
EJECT
(11). The display will show
will be ejected and can be removed. If the CD
is not removed from the slot, the CD player
will pull it in again automatically after approx.
10 seconds.
Keys
4 4, PLAY/ PAUSE
27 2, 7, PLAY/ PAUSE
1, 3, 5, PLAY/ PAUSE
chapters 6.3.3 and 6.3.4).
in forward / reverse direction
glass symbol will flash on the left at the bot-
tom of the display. On the right of it, the letter
A
will appear and in the upper line of the dis-
play the name of the first file beginning with
the letter A.
REV (8) [reverse direction] to select the first
letter of the desired file name. The numerals
0 – 9 are also available. If there are no file
names beginning with certain letters or num-
bers, these letters or numbers are marked
None
.
the same letter, select the desired letter and
keep the button REV or CUE pressed until
the letter starts flashing next to the magnify-
ing glass symbol. All file names beginning
with the letter will now be available to be
selected one after the other with the button
REV or CUE.
the number of the folder and of the title on the
right at the bottom. When you have found the
desired title, start the replay with the button
PLAY/ PAUSE (10).
search for folders
) or to the first tile of the previous folder
).
If you stop the replay with the button STOP
, the upper line of the display will show the
GB
, the CD
9