Warming Function; Keep Warm Function - Topcom Baby Bottle Warmer 301 Manual De Usuario

Ocultar thumbs Ver también para Baby Bottle Warmer 301:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
4.2
Sterilizer
Pour the 30ml water into the warming basin
Put a baby bottle, teat or pacifier into the warming basin.
Install the food cup
Turn the thermostat
The heating element will heat the water to a 100°C and creates steam.
It will need 15 minutes to sterilize the baby bottle, teat or pacifier.
Disconnect power.
Remove the food cup
The sterelized items can be extremely hot. Do not remove them with
bare hands as this may cause burn injuries.
Wash bottles, teats and pacifiers in warm water prior to sterilization.
4.3

Warming function

The Baby Bottle Warmer 301 (KF-4301) can be used to warm your baby's
hotchpotch.
Pour the 150ml water into the warming basin
Put the baby food (max 150g) in the food cup
Put the food cup
3
Position the cup cover
Turn the thermostat
The water will warm up to maximum 100°C. The water will heat and heat
the food.
Stir regularly
Disconnect power, let the device cool down and clean the steamer bowl
and cover immediately after use.
The cooking time and result can vary according to the size and quality
of the food. Exercise before use.
Do not put your hands over the holes as this may cause burn injuries.
Do not lift the cover during heating without wearing oven gloves.
Stir the food after heating to distribute the heat.
Always check the food temperature by testing some on the back of your hand.
4.4

Keep warm function

Once you have warmed your baby bottle or food, you can keep it warm.
Make sure that there is 150ml water in the warming basin
Put the baby bottle or the food cup
Turn the thermostat
The water will warm up and keep the baby bottle or food cup content on the selected temperature.
Do not keep the bottle longer warm than 1 hour.
Always check that the food temperature by testing some on the back of your hand.
TOPCOM Baby Bottle Warmer 301
upside down on top of the warming basin
3
to 100°C.
6
and remove the baby bottle, teat or pacifier.
3
into warming basin
.
4
on the food cup.
to 100°C.
6
into warming basin
3
to the desired temperature.
6
TOPCOM Baby Bottle Warmer 301
.
4
.
4
.
4
.
3
.
4
.
4
30ml
150ml
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kf-4301301

Tabla de contenido