General Operation; Listening To The Radio - AEG SR 4380 CD/DAB+/USB Instrucciones De Servicio

English
54
3. Select the menu item "Sprache" with the
/ TUN − buttons. Confirm with the ENTER button.
4. Select the desired language with the
/ TUN − buttons. Confirm with the ENTER /
CLOCK button.
NOTE:
The menu is described with the selected language
"ENGLISH" in the instruction manual.
Setting the Time of the Device Manually
If the device is in standby mode, the display will indicate the
time. It can be set as follows:
• By using the buttons / TUN+ /
make the settings.
• Press the ENTER / / CLOCK button to confirm your
setting.
1. Keep the / FUNC button pressed for about 3 seconds
in order to switch the device to standby. The current time
will appear on the display.
2. Keep the ENTER / / CLOCK button pressed. The
notification "24 H" will appear on the display.
3. Now set the time display format (24 or 12 hours), the
hours, minutes, seconds, year, month, and day.
NOTE:
• In 12 hour display appears
AM = morning, PM = afternoon.
• The storage of the time and date will be erased once
the power supply has been interrupted.

General Operation

Turning Device On / Off
• Press the / FUNC button to turn on the device.
• To turn off the device, press the / FUNC button for
approx. 3 seconds. In standby mode, the current time
appears on the display. Then disconnect the mains plug.
NOTE:
In CD / USB / AUX mode: After about 10 minutes with no
signal, the device will automatically switch to standby. In
order to use the device again, press the / FUNC button.
VOL+ / ALARM 1 / VOL− / ALARM 2 (15 / 16)
Adjust to your preferred volume level.
Delayed Shut-Off (SLEEP)
The device automatically switches off when the selected time
is reached.
1. Press the SLEEP / SNOOZE button. "Sleep: 120" appears
on the display.
2. Press the SLEEP / SNOOZE button repeatedly to select
the time after which you want the device to switch off.
SR4380CD_DAB+_USB_IM_new
/ TUN+ / Select between 120 to 10 minutes in increments of 10
minutes. The smallest setting is 5 minutes.
/ TUN+ /
NOTE:
/
Briefly press the SLEEP / SNOOZE button in order to display
the remaining time.
– Headphone Jack
For headphone operation, use headphones with a 3.5 mm
jack plug that you plug into the headphone jack of the
device. The loudspeakers will be shut off.

Listening to the Radio

/ TUN − you can
Hints for FM / DAB Reception
• The FM and DAB reception are dependent on the
location.
Follow the steps below:
- Completely extend the telescopic antenna.
- For FM:
- For DAB: For optimal DAB reception, we recommend
• Depending on the location, some station may not be
received in your region or only with interference.
• When playing a radio station, the time and date is taken
from the broadcasting service.
• The FM and/or DAB supplementary information (RDS /
DLS) may differ. This is selected and transmitted individ-
ually by the broadcast stations. If the reception quality at
your location is inadequate, the supplementary informa-
tion may be displayed incorrectly or not at all. This is not a
malfunction of the device!
Scan FM Stations
1. Repeatedly press / FUNC button until the display shows
"FM".
2. You have two options for tuning a station:
Automatic Station Scan:
Important! Any previously stored radio stations will be
overwritten.
- Keep the AMS / MODE button pressed. The device
automatically searches for FM stations. "Scanning..."
appears in the display. The radio stations found are
stored in ascending order of frequency.
Manual Scan for Radio Stations:
- Press the
station frequency.
- If you keep the
pressed, the device will search for the next or previous
radio station.
If necessary, change the position of the
telescopic antenna to improve the recep-
tion.
to align the telescopic antenna vertically.
/ TUN+ / / TUN − buttons to set the
/ TUN+ / / TUN − buttons
12.05.17