Special Functions - Garant 380865 1 Manual De Instrucciones

7. Ending measurement
1. After the use, insert the probe cap on the probe fully.
2. Turn off the power.
After the use, be sure to press the ON/OFF switch to turn off the power. In preparation
for the user forgetting to power off the Tesla meter, when the meter is run on a battery or
external power source, it is equipped with an auto power off function to automatically turn
off the power when 15 minutes have passed after a key was operated last.
3.3

Special functions

1. Converting the measuring unit from G to mT:
Caution!
2. To turn off the automatic shut-down function:
Please switch off the device and remove the cover of the battery com-
partment. The switch – see photo ¬– is now visible. The unit shown in the
display can be changed by pressing the switch. The default unit at the
time of delivery is "G"
Be sure to turn off the power before changing the units. Changing the units with
the power kept on will result in a failure.
Use a screwdriver or other tool having a sharp tip to change the units.
In normal operating mode, the device is switched off after 15 min. in
order to save the battery life. If this is not favoured in case of continuous
measurements, you can switch off the automatic shut-down function by
long-pressing the ZERO-SET button (more than twice).
www.hoff mann-group.com
DE
EN
FR
IT
ES
CS
PL
RU
ZH
27