Overview; Assembly And Adjustments; The Backrest; The Seat - B+B TS-Aqua Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TS-Aqua
| shower commode wheelchair

3.4. Overview

The instructions for use of your B+B shower commode wheelchair
include detailed illustrations to make it as easy as possible for you to
familiarise yourself with its use and handling.
See the following illustrations for the names and interaction of the
various components (see Fig. 1a and 1b).
Pushing handle
Back pad
Arm rests (folding)
Seat pad
Toilet bowl with lid
5" wheels with brakes with
directional locks
Leg rests (can be swung
away and removed)
24" hand rims - drive
wheels
Parking brake
32

4. Assembly and adjustments

Your B+B shower commode wheelchair is delivered ready-assembled in
a B+B original box. Attached parts are supplied separately to prevent
damage during transport.
You can carry out the adjustments of your commode chair yourself with
a little manual dexterity. If you have any queries, please contact your
specialized dealer.

4.1. The backrest

The backrest can be removed completely.
Unscrew (anticlockwise) the two star grip screws on the rear of the
shower commode wheelchair. (Fig. 2)
The backrest can then be pulled out of the guide rails that lie on
both sides, or pushed in to assemble it. (Fig. 3)

4.2. The seat

Installing and removing the seat
The seat of your shower commode wheelchair can be removed and
replaced.
1a
The seat is fixed to the frame of the shower commode wheelchair
by two curved clamps.
To remove the seat, hold the front and back of the shower
commode wheelchair and pull the seat with a light jerk.
Replace the seat by placing it on the frame and press down on the
front and back.
1b
Bischoff & Bischoff GmbH | 01.06.2019
shower commode wheelchair |
TS-Aqua
02
03
04
33

Publicidad

Tabla de contenido
loading

Tabla de contenido