MELICONI CONTROL 2 SIMPLE Instrucciones De Uso página 12

TROUBLESHOOTING
IMPORTANT!
Most problems are caused by using insuffi ciently charged batteries.
We recommend checking them and, if necessary, replacing them as shown in the INSERTING
THE BATTERIES section.
- IF THE REMOTE CONTROL IS NEW AND YOU CANNOT MAKE IT WORK
Check that you have carried out all the settings procedures correctly. If necessary repeat them, following all the steps
indicated carefully.
The code set in the remote control is incorrect for the device that you want to control. Consult the www.meliconi.com/guide
website to fi nd the correct code for your device. Or try entering all the codes for the same brand shown on the website or
received via SMS one by one and check which one works.
- IF THE REMOVE CONTROL STOPS WORKING
Make sure that the batteries are new and that the remote control is pointing at the device without any obstacles between
them. Try entering the code used to set the remote control again.
- THE REMOTE CONTROL DOES NOT EXECUTE CERTAIN FUNCTIONS
The MELICONI remote control normally provides the functions that are on the keypad, as long as they are on the original
remote control too.
If some of the MAIN functions are not available, you are probably using an incorrect code. Find and set a more suitable code
as described earlier.
ASSISTANCE
Consult the www.meliconi.com website for more detailed information on the product and for the on-line tools to
activate the remote control quickly and easily.
IMPORTANT!: When contacting technical support it is INDISPENSABLE that you communicate the BRAND and MODEL
of the device that you want to control and which MELICONI remote control you are using.
To contact an operator send an e-mail to: telecomandi@meliconi.com
2 YEAR WARRANTY: always keep your sales receipt as proof of the validity of the product's warranty. The warranty
is voided if the product is tampered with or used improperly.
The symbol showing a wheelie bin with a cross through it which appears on the device indicates that at the end of its useful life the
product must be collected separately from other waste. Therefore, at the end of the device's life, you must take it to appropriate
centres for the differentiated collection of electrical and electronic waste, or return it to the retailer when purchasing a new device of
equivalent type, on a one-for-one basis. The correct differentiated collection to allow subsequent recycling of the decommissioned
device, with environmentally-compatible treatment and disposal, help to prevent any negative effects on the environment and health
and to promote the recycling of the materials of which the device is made.
12