Technical Description; Operating Principles; Precautions For Installation - Brasilia ACTION LADY Manual De Instrucciones

- Brass boiler
- Delivery group for ground coffee or for coffee pods
- Brass steam boiler with double safety
- Cappuccino (frothed milk) delivery group
- Machine with incorporated water reservoir
- Hot water delivery
An espresso coffee machine is basically made up of the following elements:
Coffee Boiler
Is used to contain the hot water and is made of brass so that its properties do not deteriorate over the years.
Steam Boiler
Is used to contain the steam and is made of brass so that its properties do not deteriorate over the years.
Coffee brewing group
The coffee brewing group is the component which, when attached to the filter holder (containing the filter and the ground coffee or the coffee pod),
brews and delivers the beverages when supplied with hot water.
Milk frothing device
This device is the component in which the milk gets "frothed" through a mixture of steam, milk and water and than is delivered.
Heat source
This is normally provided by an electric heating element immersed in the boiler which heats the water and provide the steam.
Electric pump
This device is used for transferring water from the reservoir to the boiler.
Hot water deliverer
It allows hot water to be delivered for preparing hot drinks, tea and tisanes.
The manufacturer has obviously taken every possible precaution to guarantee user safety, but the different installation and/or transport conditions
could give rise to uncontrollable or unpredictable conditions; so it is always necessary to assess possible hidden hazards and to consider the
following suggestions:
- The packing elements (cardboard, cellophane, metal staples, etc.) can cut, wound or cause accidents if not handled carefully or if used incorrectly;
do not leave them accessible to children or unsuitable people.
- Any fault or defect should be promptly notified to the personnel who are qualified and authorized to carry out installation and maintenance.
- An earthing connection is mandatory, as is the system's conformity with the regulations in force in the country of installation. The manufacturer
accepts no responsibility for accidents due to non-compliance with the regulations.
- The use of extensions or flying connections is prohibited. The working environment is heavily exposed to water and damp which prevent the
natural conditions for insulating the system.
- The machine must only be installed by authorized, qualified personnel.
- Check the condition of the components and, should defects or faults arise, stop the installation and ask for their replacement.
- Ensure that the power supply voltage (see rating plate) is the same as that of the mains supply network to be used in the place of installation.
- The customer must provide for the machine's power supply, protecting the line with a suitable safety cut-out (life-saver).
Action Lady

TECHNICAL DESCRIPTION

Characteristics

Operating Principles

INSTALLATION - LOCATION - START-UP

Precautions for installation

rev.4 - 08/2004 10