Features; Product Specifications - Rigid R4122 Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS

Blade Diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 in.
Arbor Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 in.
No Load Speed . . . . . . . . . . . . . . . . . . 4,000 r/min. (RPM)
Input . . . . . . . . . . . . . . . . 120 V, AC Only, 60 Hz, 15 Amps
Cutting Capacity with Miter at 0°/Bevel 0°:
Maximum lumber sizes: . . . . . . . . . . 3-1/2 in. x 5-1/2 in.
Cutting Capacity with Miter at 45°/Bevel 0°:
Maximum lumber sizes: . . . . . . . . . . 1-1/2 in. x 5-1/2 in.
Cutting Capacity (Right Bevel) with Miter at 0°/Bevel 45°:
Maximum lumber sizes: . . . . . . . . . . . 3/4 in. x 7-1/4 in.
Cutting Capacity (Left Bevel) with Miter at 0°/Bevel 45°:
Maximum lumber sizes: . . . . . . . . . . 1-1/2 in. x 7-1/2 in.
CARRYING HANDLE
DUST
BAG
WORK
CLAMP
SLIDING MITER
FENCE
LASER
GUIDE
UPPER BLADE
GUARD
CONTROL
ARM
MITER
MITER
SCALE
TABLE
Cutting Capacity with Miter at 45°/Bevel 45°:
Maximum lumber sizes: . . . . . . . . . . 1-1/2 in. x 5-1/2 in.
Cutting Capacity for Crown Moulding (Nested or Flat):
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1/2 in.
Cutting Capacity for Baseboards against the fence:
Maximum height . . . . . . . . . . . . . . . . . 6-1/2 in. x 3/4 in.
LOCK PIN
"D" HANDLE
SWITCH
TRIGGER
LOWER
BLADE GUARD
SLIDING MITER
FENCE
"NO HANDS ZONE"
BOUNDARY LINE
DETENT
RELEASE
MITER
BUTTON
LOCK LEVER
9 - English
BLADE WRENCH
BEVEL
LOCK KNOB
ZERO BEVEL
STOP BUTTON
"NO HANDS ZONE"
LABEL
THROAT
PLATE
SAW
BASE
DETENT
OVERRIDE
LEVER
STORAGE
FENCE
SCREW
Fig. 1