Beurer BC 40 Manual De Instrucciones página 23

Tensiómetro
Ocultar thumbs Ver también para BC 40:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
If the battery replacement symbol
no longer perform any measurements and must replace all
batteries.
Battery disposal
The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury
Setting the hour format, date and time
This menu allows you to set the following functions, one
after another.
Hour format
It is essential to set the date and time. Otherwise, you will
not be able to save your measurements correctly with a
date and time and access them again later.
If you press and hold the memory button M you can set
the values more quickly.
is displayed, you can
Date
Time
To access the settings mode, either reinsert the batteries or
press and hold the START/STOP button
when the device is switched off.
Hour format
Select the desired hour format using the
memory button M and confirm with the
START/STOP button
Date
The year flashes on the display.
Select the desired year using the memory
button M and confirm with the START/
STOP button
.
The month flashes on the display.
Select the desired month using the memory
button M and confirm with the START/STOP
button
.
The day flashes on the display.
Select the desired day using the memory button M
and confirm with the START/STOP button
If the hour format is set as 12h, the day/month
display is reversed.
23
for 5 seconds
.
.

Publicidad

Tabla de contenido
loading

Tabla de contenido