Monacor PAM-10 Manual De Instrucciones página 6

5 Operation
1) Switch on the unit with the POWER switch (4) . The
POWER LED (3) will light up .
2) To make an announcement, press the talk but-
ton (5) . When speaking into the microphone (1),
hold the microphone as close to your mouth as
possible .
3) Adjust the desired volume with the VOLUME con-
trol (2) . In case of feedback howl, reduce the vol-
ume accordingly .
4) After the announcement, press the talk button
once again to unlock it .
6 Specifications
Rated power at 4 Ω: . . . . 10 W
Frequency range: . . . . . . 80 – 12 000 Hz
Speaker impedance: . . . . 4 – 16 Ω
Type of microphone: . . . . electret, omnidirectional
Power supply: . . . . . . . . . 230 V/ 50 Hz / 12 VA
Ambient temperature: . . 0 – 40 °C
Subject to technical modification .
All rights reserved by MONACOR
in any form or by any means for any commercial use.
6
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may be reproduced
®