Deleting Measurements From The Memory; Downlod The Records To Your Computer - AEG BMG 5677 Instrucciones De Servicio

c. When displaying the average value, the monitor will turn off automatically after
2 minutes of no operation. You can also press the button "O/I" to turn off the
monitor manually.

11. DELETING MEASUREMENTS FROM THE MEMORY

When any result is displayed and you keeping
pressing the "M" button for three seconds, all
results in the current memory bank will be deleted
after three "beeps". The unit is switched off when
you press the "O/I" button.

12. DOWNLOD THE RECORDS TO YOUR COMPUTER

a. Ensure that your computer have installed the software "AEG PC Manager". The
installation file is stored in the accompanying CD. The installation guide is enclosed
the CD Alternatively you can be found the link to download the software on our
website:
https://portal0.sli24.de/bdas/AEG/520777/PC-Software AEG BMG 5677.rar
b. While the monitor is in Off Mode, slide the touch switch to "ON" position. Con-
nect the monitor to your computer by USB cable.
c. After power on, Press "M" button to display the stored results, you can select the
memory bank.
d. Please run the software "AEG PC Manager" in your computer.
e. Press the Download Label
the monitor.
f. Please turn off the monitor and disconnect it with your computer after the down-
loading.
Note:
• Don't turn off the monitor while downloading the results. Otherwise the results can
not be downloaded correctly.
• If the communication is abnormal, please turn off the monitor and connect the
monitor to your computer again.
, your computer start to download the results from
English
103