Monacor security TVCCD-400COL Manual De Instrucciones página 10

tended, if it is not correctly connected or operated or
GB
not repaired in an expert way.
If the camera is to be put out of operation defini-
tively, take it to a local recycling plant for a disposal
which is not harmful to the environment.
3 Applications
The PAL colour camera TVCCD-400COL is specially
designed for applications in video surveillance sys-
tems. Among other features it is provided with an auto-
matic gain control (AGC), an automatic electronic
1 1
shutter ( / – /
50 100 000
(range 2400 °K to 11 000 °K), and a backlight compen-
sation.
4 Lens
It is possible to use a lens with automatic iris control
[AI lens or DC lens (AIS lens)] or a lens with manual
iris control.
1) Adjust the lens type used with the selector
switches AUTO IRIS (2) and SHUTTER (6):
10
s), an automatic white balance
Lens type
video signal
controlled
DC controlled
manual or fixed iris
2) Remove the lens cover (10).
Attention! Protect the CCD image sensor chip
and the lenses of the lens assembly against dust
and other impurities; never touch them with your
fingers.
3) When using a C-mount lens, screw the supplied
C-mount adapter ring (9) onto the camera first,
then screw the lens onto the ring. When using a
CS-mount lens, remove the adapter ring (9), if re-
quired, then screw the lens directly onto the face of
the camera.
4) When using an auto iris lens, connect it to the jack
AUTO IRIS (5). If required, use the supplied plug.
Depending on the position of the switch AUTO IRIS
Switch Switch
AUTO IRIS SHUTTER
VIDEO OFF
DC OFF
SHUTTER
—
(lower position)