Tool Reactivation; Dashboard - Oregon Professional Serie Manual De Instrucciones

• To activate Stealth Mode, press the Stealth
Mode button beneath the dashboard A blue
light above the button indicates the tool is in
Stealth Mode
• Press the button again to deactivate Stealth
Mode and return to full speed.

Dashboard

The dashboard is located on the control handle of the Oregon EG120VX-NA and displays the
current charge state of the battery connected to the tool and any faults from the tool or battery.
5 green LEDs
LEDs
Full charge
MEANING
100% to 81%
To determine the approximate number of hours the tool has been operated, insert the battery plug
and press the Stealth Mode button for 3 seconds.
LEDs
SOUND
MEANING
14
v
120
INDICATORS
4 green LEDs 3 green LEDs 2 green LEDs 1 green LED
80% to 61%
INDICATORS
none
1 beep
<49 hours
Operation

Tool Reactivation

When the edger has not been in use for 45
seconds it will enter a dormant mode, during
which engaging the trigger lock lever and
pressing the speed trigger will result in the blue
Stealth Mode light blinking rapidly
• Press the Stealth Mode button and the
edger will immediately re-activate and the
dashboard will show battery charge state
60% to 41% 40% to 21%
1 blue LED flash and beep
1 red LED
Low power
20% to 10%
<10%
blue LED flash
beep
for every 50 hours
Edger Model EG120VX-NA