Maintenance; Lubricating The Gearbox; Replacing The Cutting Blade - Oregon Professional Serie Manual De Instrucciones

Maintenance

Lubricating the Gearbox

WARNING:
To reduce risk of injury,
disconnect the battery from the power tool
before making any adjustments, changing
accessories, or transporting.
CAUTION: To reduce risk of injury,
check the grease level after every 25
hours of operation and add Premium High
Temperature Lithium Wheel Bearing
Grease Grade NLGI #2 as follows:
• Unscrew filler zerk.
• Assess grease level on the inside of gearbox.
• Refit and firmly tighten the filler zerk.
• If no grease was visible, use a grease gun
fitted with a needle tip adapter (see below) to
insert no more than 5 g (0.2 oz.) of grease into
the gearbox.
16
Maintenance

Replacing the Cutting Blade

• Do not sharpen cutting blade.
• Do not straighten or weld a damaged
blade. It may break It must be replaced
See Mounting the Cutting Blade
• Use only original Oregon edger cutting
blades. Replace the blade if its length is no
longer sufficient to maintain the necessary
ground clearance and obtain the required
depth of cut
Edger Model EG120VX-NA