Initial Operation - Hartmann Veroval B2B-AT-41 Instrucciones De Uso

English
EN

3. Initial operation

„ Remove protective film from display
Initialise tracker using switch on
„ When switching on the tracker, you will feel a little resistance when pressing
the menu key. However, do not release the menu key.
Charge the tracker fully before using it for the first time. Before you
can charge the battery, the tracker has to be switched on.
„ Hold menu key (3) down for eight seconds. 12:00 will appear on the display.
„ Connect the battery with a power source as described in the section
'Charging the battery'.
Charging the battery
„ Connect the tracker with the USB
„ Connet USB
You can also use a suitable mains adapter with a USB port (not
included in the scope of delivery).
adapter to a PC.
98
adapter (see Section 1).