System Setup; Charging The Unit - Impecca DVPDS-722 Manual De Usuario

SYSTEM SETUP

Charging the unit

The player is powered by a lithium-polymer battery, which
features a high ratio of energy to weight. It has no memory
or partially discharged.
It takes about six hours to fully charge the battery and a fully-
charged battery can be used for about 4-5 hours.
Connect the attached AC/DC adapter to the DC INPUT jack on
the unit, then plug the adapter into a 240V AC outlet.
NOTE:
charging indicator LED will change from RED to OFF to indi-
cate that the battery has been fully charged. When the unit is
turned ON(using the OFF/ON switch on the left side panel) the
Green LED indicator light will stay on.
Usage and Maintenance of the rechargeable battery:
• The working temperature range is 0-45C.
• Always unplug the unit when not in used—unless it is
being charged.
• Heat is inevitably produced during playback, which is
• Avoid impact to player, and keep it away from heat and
moisture.
The DVD player also has sound and video input jacks for con
necting external audio and video inputs.
16