SYSTEM SETUP
Press the SETUP button on the remote control unit to open
the setup menu. Use the directional buttons (up, down, left,
right) to select menu items. After changing the desired settings,
press the SETUP button again to return to the normal display.
General Settings
TV Display: sets the aspect ratio of the playback image when
using an external television display.
•
4:3 Panscan: a standard 'square' television (4:3 aspect
ratio) will trim the left and right sides off of a wides-
creen film. Also known as fullscreen.
•
4:3 Letterbox: select this if you have a standard
'square' television (4:3 aspect ratio). In this case, the
full image will be shown on the screen with black
letterbox bars on the upper and lower portions of the
image.
•
16:9: Choose this display option on any widescreen
display (most HDTVs).
•
Wide Squeeze: Squishes a widescreen image to fit a
4:3 screen with no trimming.
Angle Mark:
Displays current camera viewing information on the right hand
corner of the TFT screen if available on the disc.
OSD Language
Change the DVD player system language
Closed Captions
Closed captions are data that are hidden in the video signal of
some discs for the hearing impaired. Closed captions are differ-
ent from subtitles that can be selected by using the SUBTITLE
button or in your DVD menu. You can enable closed captions
with this option
8