Zipper Maschinen ZI-HAEK4100 Manual De Instrucciones página 30

ZI-HAEK11000:
ZIPPER MASCHINEN GmbH
ZI-HAEK4100 / ZI-HAEK11000
www.Zipper-Maschinen.at
Base foot:
Tilt the blades chassis slightly
backwards and fix the base foot
with screws, washers and nuts.
Drawbar:
Place the drawbar on the base
foot and fix with screws M12x100,
washers and nuts M12.
Wheels:
Push the axis through the rim,
tighten the nut and secure with a
splint.
Then fit the hubcap.
Axis:
Tilt the blades chassis slightly
backwards and fix the axis with
screws, washers and nuts.
ASSEMBLY
30