Recording Configuration; Configuring Date/Time Settings - Nevir NVR-7502-19HDD-N Manual De Instrucciones

• When finished with editing, press
save. You can press MENU button to cancel.
Deleting a Timer
• Select the timer you want to delete by pressing "
" or " " button.
• Press RED button.
• Select YES by using " " or " " buttons to delete the
timer. Select NO to cancel.

Recording Configuration

Select Recording Configuration item in the Settings
menu to configure recording settings. The following
menu is displayed for recording configuration.
The following options are available for adjustments:
Start Early (*)
You set recording timer's starting time to start earlier
by using this setting.
(*) Available only for EU country options.
End Late (*)
You set recording timer's end time to end later by
using this settings.
(*) Available only for EU country options.
Max Timeshift
This setting allows you to set the maximum time
allowed for timeshifting. Duration options are
approximate and can change accordingly, depending
on the broadcast received.
Format Disk
IMPORTANT: Note that ALL the data stored on the
USB disk will be lost and then the disk format will be
converted to FAT32 if you activate this feature.
•If you want to delete all files on the connected USB
hard disk drive or memory stick, you can use Format
Disk option.
• Also, if your USB disk malfunctions, you can try
formatting the USB disk. In most cases formatting
the USB disk will restore normal operation; however,
ALL the data stored on the USB disk will be lost in
such a case.
GREEN button to • Press OK button while the Format Disk option
is highlighted. A menu will appear on the screen,
requiring you to enter a pin number. If you have not
changed the pin number, the factory default is 0000.
After you enter the pin, a pop-up menu appears on
the screen to ensure that the hard disk should be
formatted, select "YES" and press OK to format the
hard disk. Select "NO" and press OK to cancel. Ensure
you back up important recordings before you format
the USB disk unit.
Hard Disk Info
To view the details about the USB disk, highlight Hard
Disk Info by using " " or " " key and press OK. USB
disk information will be displayed
Select Date/Time in the Settings menu to configure
Date/Time settings. Press OK button.
•
Date,Time,Time Settings Mode and Time Zone Setting
will be available.
Use " " or " " buttons to highlight the Time Settings
Mode. Time Settings Mode is set using " " or " "
buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone can be altered:
• By pressing " " or " " buttons select Time Zone.
Use " " or " " buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
•
English - 30 -

Configuring Date/Time Settings

Use " " or " " buttons to highlight Date/Time.
Changes are automatically stored. Press
exit.
MENU to