10.16 Tray adjustment
To adjust the depth of the tray, loosen knob
(A) set to the required position then retighten
securely. To height adjust the tray, loosen
knob (B), set to the required position and
then retighten securely. To angle adjust the
tray, loosen ratchet handle (C), set to the
required angle and then retighten securely.
Do not adjust the horizontal bars beyond
the moulding, except when you are
removing the tray.
Always use caution to ensure the child's
hands or arms do not become trapped
when inserting the tray.
Never use the tray to steer or push
the chair.
Always use caution to ensure that fingers
do not become trapped in the slot when
height adjusting the armrest.
Do not place hot objects, greater than 40
degrees Celsius, on the tray.
Please note that the tray is for the use
of the user only. Do not lean or place
heavy objects on the tray greater
than 8kgs (17.6lbs).
C
A
B
10.17 Grab rail
adjustment
To set the height, loosen knob (D), adjust to
required position and retighten securely.
To set the depth of the grab rail to suit the
child's reach, loosen knob (E) adjust to the
required depth and then re-tighten.
D
E
D
Frequent
adjustment
for daily use
(therapists/
carers/parents)
Parents and carers should be
shown how to make frequent
adjustments and made aware of the
safety checks in Section 6
by a technically and clinically
competent person who has been
trained in the use of the product.
Leckey recommend that a written
record is maintained of all parent
and carers who have been trained
in the use of this product.