Temperature; Advanced; Firmware Version; Double-Tap To Switch - Chauvet Professional VIP Drive 43s Manual Del Usuario

O
PERATION

Temperature

The Temperature option displays the current product temperature in either Celsius or Fahrenheit.
1. Press <MENU> to access the menu.
2. Turn the <SCROLL/ENTER> knob until Temperature is selected.
3. Press the <SCROLL/ENTER> knob. The current product temperature will be displayed.
To select the unit of temperature to display:
4. Press the <SCROLL/ENTER> knob again.
5. Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to select from Celsius or
Fahrenheit.
6. Press the <SCROLL/ENTER> knob.

Advanced

The Advanced menu includes button controls, port assignment, a factory reset option, and preset output
formats.
To access the Advanced menu:
1. Press <MENU> to access the menu.
2. Turn the <SCROLL/ENTER> knob until Advanced is selected.
3. Press the <SCROLL/ENTER> knob.

Firmware Version

To view the firmware version of the product, access the
firmware version.

Double-tap To Switch

The Double-tap To Switch option determines how many button presses are required to switch input
sources.
1. Access the Advanced
2. Turn the <SCROLL/ENTER> knob until Double-tap To Switch is selected.
3. Press the <SCROLL/ENTER> knob.
4. Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to select Off (One press will
switch input sources) or On (Button must be pressed twice to switch input sources).
5. Press the <SCROLL/ENTER> knob.

Preview Output

The Preview Output setting determines whether the preview display shows the video signal before or after
scaling.
1. Access the Advanced
2. Turn the <SCROLL/ENTER> knob until Preview Output is selected.
3. Press the <SCROLL/ENTER> knob.
4. Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to select Pre (Outputs the
unscaled video signal) or Post (Outputs the scaled video signal).
5. Press the <SCROLL/ENTER> knob.

Preview DVI Port

The Preview DVI Port setting determines whether the PREVIEW OUT port outputs a preview signal to a
monitor, or a full video signal to another product.
1. Access the Advanced
2. Turn the <SCROLL/ENTER> knob until Preview DVI Port is selected.
3. Press the <SCROLL/ENTER> knob.
4. Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to select Preview or Program.
5. Press the <SCROLL/ENTER> knob.
With Program selected, the signal from the PREVIEW OUT port is unscaled.
VIP Drive 43s User Manual Rev. 1
Advanced
menu.
menu.
menu.
menu. The first line will display the
26