Set Width; Test Grid - Chauvet Professional VIP Drive 43s Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Set Width

The Set Width option determines the total width in pixels of the connected panel assembly.
1.
Access the
Map
2.
Turn the <SCROLL/ENTER> knob to select Set Width.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select H Size.
5.
Press the <SCROLL/ENTER> knob.
6.
Turn the <SCROLL/ENTER> knob to select from Auto (populates width from map settings) or
Manual (enter width manually).
7.
Press the <SCROLL/ENTER> knob.
8.
If Auto, go to step 10. If Manual, turn the <SCROLL/ENTER> knob clockwise or
counterclockwise to increase or decrease the pixel width, from 2–_ _ _ _ (this value determined
by the
Video
Input).
9.
Press the <SCROLL/ENTER> knob.
10. Turn the <SCROLL/ENTER> knob to select Set Width.
11. Press the <SCROLL/ENTER> knob.
For Set Width to function correctly, the minimum

Test Grid

The Test Grid function sends a customizable grid to the connected panel assembly, with a single panel at a
time lit up to test the mapping.
To access the Test Grid menu:
1.
Access the
Map
2.
Turn the <SCROLL/ENTER> knob to select Test Grid.
3.
Press the <SCROLL/ENTER> knob.
To enable or disable the Test Grid:
1.
Access the
Test Grid
2.
Turn the <SCROLL/ENTER> knob to select Test Grid.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select from Off or On.
5.
Press the <SCROLL/ENTER> knob.
Test Grid Port
To select which port to test:
1.
Access the
Test Grid
2.
Turn the <SCROLL/ENTER> knob to select Port.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select from Port 1–4.
5.
Press the <SCROLL/ENTER> knob.
Test Grid Color
To select the color of the Test Grid:
1.
Access the
Test Grid
2.
Turn the <SCROLL/ENTER> knob to select Grid Color.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select from Red, Green, or Yellow.
5.
Press the <SCROLL/ENTER> knob.
Test Grid Type
There are 4 available types of test grid.
1.
Access the
Test Grid
2.
Turn the <SCROLL/ENTER> knob to select Type.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select from Cross, Row, Column, or Rectangle.
5.
Press the <SCROLL/ENTER> knob.
31
menu.
menu.
menu.
menu.
menu.
menu.
O
Wall Size
(WxH) is 3x2.
VIP Drive 43s User Manual Rev. 1
PERATION

Publicidad

Tabla de contenido
loading

Tabla de contenido