Publicidad
Replacing the LED light:
Warning:
The LED light
should be replaced by a
competent person.
LED light is damaged,
contact the customer
helpline for assistance. To
replace the
LED light, the
below steps can be
followed:
Troubleshooting
If you experience a problem with your appliance or are
concerned that the appliance is not functioning correctly, you
can carry out some easy checks before calling for service,
please see below.
Warning! Don't try to repair the appliance yourself. If the
problem persists after you have made the checks mentioned
below, contact a qualified electrician, authorized service
engineer or the shop where you purchased the product.
Problem
Appliance is
not working
correctly
If the
Possible cause & Solution
Check whether the power cord is plugged
into the power outlet properly.
Check whether the "Power" funtion is on
by pressing the "power" button for 1
second.
Check the fuse or circuit of your power
supply, replace if necessary.
The ambient temperature is too low. Try
setting the chamber temperature to a
colder level to solve this problem.
1. Unplug your appliance.
2. Remove light cover by
pushing up and out.
3. Hold the LED cover with
one hand and pull it with the
other hand while pressing
the connector latch.
4. Replace LED light and
snap it correctly in place.
20
Publicidad
