Descargar Imprimir esta página

Installing Your New Appliance - Hisense RB338N4AG2 Manual De Operación Del Usuario

Publicidad

Installing your new appliance

Before using the appliance
for the first time, you should
review the following tips.
Ventilation of appliance
In order to improve
efficiency of the cooling
system and save energy, it
is necessary to maintain
good ventilation around the
appliance. For this reason,
sufficient clear space
should be available around
the refrigerator.
It is advisable for there to
be at least 75mm of space
from the back to the wall, at
least 100mm from its top,at
last 100mm from its side to
the wall and a clear space
in front to allow the doors to
open 130°. Please see the
following diagrams.
100
100
130
956
Note:
This appliance performs
well within the climate class
from SN to T showed in the
table below.
It may not work properly if
left at a temperature above
or below the indicated
range for a long period.
Climate class
Ambient temperature
SN
N
ST
T
Stand your appliance in a
dry place to avoid moisture
damage.
Keep the appliance out of
direct sunlight, rain or frost.
Stand the appliance away
from heat sources such as
stoves, fires or heaters.
Leveling of appliance
For sufficient leveling and
air circulating in the lower
rear section of the
appliance, the bottom feet
may need to be adjusted.
You can adjust them
manually using a suitable
spanner.
8
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C

Publicidad

loading