Other Useful Functions; Transpose Function; Octave Function - Roland PK-6 Manual Del Usuario

5.

Other useful functions

Below please find additional functions that may come in handy while you are playing.

Transpose function

This function allows you to transpose the note pitches
of the pedals in semi-tone steps. The interval you set
applies to MONO, POLY and DRUM modes and cannot
be set for each mode individually.
Function Value
Transpose –5~6
1.
Press the [SHIFT] footswitch to activate
Shift mode (secondary footswitch func-
tions).
The [SHIFT] indicator lights.
The display shows:
---
2.
Press the [POLY/TRANSPOSE] footswitch.
The [TRANSPOSE] indicator flashes and the display
shows the current transposition interval. If you selec-
ted this parameter by mistake and do not want to
change it, proceed to step (4).
3.
Default
0
4.
1.
2.
Dynamic MIDI Pedal PK-6
The display shows:
Press the [OCTAVER BASS/DOWN] or [POR-
TAMENTO/UP] footswitch to decrease or
increase the current value.
This setting will be used until you switch the PK-6
off.
Press the [ENTER] pedal (far right) or the
[SHIFT] footswitch to leave Shift mode.
NOTE
You can save this setting so that it will still be available the
next time the power is turned on. To save the setting, pro-
ceed as described in "Saving the settings (Write Function)"
auf S. 23.

Octave function

This function allows you to transpose the note pitches
of the pedals in octave steps. The interval you set
applies to the currently selected mode (MONO, POLY or
DRUM) and can be set for each mode individually.
Function Value
Octave 0~–8
Press the [SHIFT] footswitch to activate
Shift mode (secondary footswitch func-
tions).
The [SHIFT] indicator lights. The display shows:
---
Press the [DRUM/OCTAVE] footswitch.
r
Other useful functions
0
Default
MONO mode= 2
POLY mode= 4
DRUM mode = 2
19