Connecting The Base Station To The Telephone Network - Medion E63032 Manual De Instrucciones

Charging the rechargeable batteries in the base station
You cannot make calls with the handset while the rechargeable
batteries are being charged. For that reason, only connect the base
station to the telephone network after the handset has been
completely charged.
 Place the handset in the charging cradle of the base station and charge
the rechargeable battery.
 A beep indicates that the handset has been correctly placed in the cradle.
The battery symbol in the top right of the display indicates that the
rechargeable battery is being charged.
Connecting the base station to the telephone
network
CAUTION!
Only connect the base station to the telephone network after
the handset has been completely charged. Otherwise the
rechargeable batteries will not achieve their full capacity.
 Insert the Western jack of the supplied telephone cable in the left jack at
the bottom of the base station.
 Insert the other plug on the telephone cable to the telephone wall
socket.
16