Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

 The desired handset will now be called. If the person at the other handset
accepts the call, you can hold an internal conversation with that person.
 To transfer the call, press the call key or place the handset in the charge
cradle.
The caller is now connected to the person with the other handset.
Holding a conference call
If a second handset accepts the call as described above, you can hold a
conference call.
A conference call between one external and two internal subscribers is
possible.
Transfer the external call to another handset and wait until the subscriber
accepts the call on the other handset.
 Press the * key.
are included in the call.
 Every party can leave the conference call by simply pressing the call key
(hanging up). The other callers can continue to hold the conference call.
 The party who started the conference can also end the conference by
pressing the call key (hanging up). The connections to all partners is then
ended.

Paging the handset

 If you page the handset from the base station, or if you are looking for
the handset, then press the paging key at the base station.
This triggers a ringing signal from the handset, and "
the display.
 Stop the ringing signal with the call key.
CONFERENCE
appears in the display. Now all subscribers
PAGING
" appears on
ES
EN
DE
27

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Md 83073

Tabla de contenido